EHI East Hardware Industries Ltd.

Selective Pallet Rack Components and Load Tables

How To Choose Upright Frames:

1. Compute total frame capacity needed to satisfy your load requirements.

2. Determine height required from floor to first beam or maximum beam spacing. If the figures are different, use the larger dimension.

3. Refer to bottom of upright capacity chart below. Reading left-to-right, locate dimension from floor to first beam or maximum beam spacing. From the beam spicing dimension, move vertically up the chart to weight capacity required for your maximum load. Moving to the right, locate the first upright capacity curve that intersects your required weight capacity. Follow curve down and across to determine correct upright post type.

4. Refer to appropriate ordering information for dimension information, and select from the available sizes.

			TEAR DROP POST WITH STANDARD FOOTPLATE
	USED FOR U80 POST GALVANIZED FINISH
TEAR DROP POST		USED FOR U80 POST PAINTED BLUE FINISH

Frames are made up of two posts, bracing and footplates. Posts are offered in tear drop. Also available for seismic zones. Frames are available with the following options:

Assembled(bolted)
Knockdown

All posts are cold roll-formed and have been designed to meet RMI specs.

POST DIMENSIONS	U80（inches）
A	3^3/16"
B	2^11/16"
(GA)GAUGE	14 (2mm)

Uprights - Available Configurations

Beam Spacing	KTU80
(Inches/mm)	(lbs/kg)
36” （914mm）	26,520lbs (12055kg)
42” (1067mm)	25,880lbs (11764kg)
48” (1219mm)	24,540lbs (11155kg)
54” (1372mm)	23,040lbs (10473kg)
60” (1524mm)	21,360lbs (9709kg)
66” (1676mm)	19,500lbs (8864kg)
72” (1829mm)	17,460lbs (7936kg)
78” (1981mm)	15,260lbs (6936kg)
84” (2134mm)	13,160lbs (5982kg)
90” (2286mm)	11,460lbs (5209kg)
96” (2438mm)	10,080lbs (4582kg)

Based on maximum vertical spacing floor to top of beam, or top of beam to top of beam.

Applicable for non-seismic use only.

Post Max High is 240"(20')

Select desired Rack Style